20 Oct 2011
Compliant space mechanisms: a new frontier for compliant mechanisms
R. M. Fowler, L. L. Howell, and S. P. Magleby
Mech. Sci., 2, 205–215, https://doi.org/10.5194/ms-2-205-2011,https://doi.org/10.5194/ms-2-205-2011, 2011 | 60,259 views
12 Jul 2012
Review article: locomotion systems for ground mobile robots in unstructured environments
L. Bruzzone and G. Quaglia
Mech. Sci., 3, 49–62, https://doi.org/10.5194/ms-3-49-2012,https://doi.org/10.5194/ms-3-49-2012, 2012 | 51,319 views
09 May 2012
Finite element thermal analysis of the fusion welding of a P92 steel pipe
A. H. Yaghi, D. W. J. Tanner, T. H. Hyde, A. A. Becker, and W. Sun
Mech. Sci., 3, 33–42, https://doi.org/10.5194/ms-3-33-2012,https://doi.org/10.5194/ms-3-33-2012, 2012 | 24,920 views
23 Feb 2023
Parameter optimization of a pure electric sweeper dust port by a backpropagation neural network combined with a whale algorithm
Jiabao Pan, Jin Ye, Hejin Ai, Jiamei Wang, and You Wan
Mech. Sci., 14, 47–60, https://doi.org/10.5194/ms-14-47-2023,https://doi.org/10.5194/ms-14-47-2023, 2023 | 12,883 views
Short summary
12 Apr 2012
Understanding the drivers for the development of design rules for the synthesis of cylindrical flexures
M. J. Telleria and M. L. Culpepper
Mech. Sci., 3, 25–32, https://doi.org/10.5194/ms-3-25-2012,https://doi.org/10.5194/ms-3-25-2012, 2012 | 8,841 views
02 Dec 2013
Monolithic 2 DOF fully compliant space pointing mechanism
E. G. Merriam, J. E. Jones, S. P. Magleby, and L. L. Howell
Mech. Sci., 4, 381–390, https://doi.org/10.5194/ms-4-381-2013,https://doi.org/10.5194/ms-4-381-2013, 2013 | 7,868 views
18 Jan 2012
Modeling of a compliant joint in a Magnetic Levitation System for an endoscopic camera
M. Simi, N. Tolou, P. Valdastri, J. L. Herder, A. Menciassi, and P. Dario
Mech. Sci., 3, 5–14, https://doi.org/10.5194/ms-3-5-2012,https://doi.org/10.5194/ms-3-5-2012, 2012 | 6,796 views
01 Jul 2013
Gantry crane control of a double-pendulum, distributed-mass load, using mechanical wave concepts
W. O'Connor and H. Habibi
Mech. Sci., 4, 251–261, https://doi.org/10.5194/ms-4-251-2013,https://doi.org/10.5194/ms-4-251-2013, 2013 | 6,620 views
06 Mar 2015
Experimental comparison of five friction models on the same test-bed of the micro stick-slip motion system
Y. F. Liu, J. Li, Z. M. Zhang, X. H. Hu, and W. J. Zhang
Mech. Sci., 6, 15–28, https://doi.org/10.5194/ms-6-15-2015,https://doi.org/10.5194/ms-6-15-2015, 2015 | 6,440 views
Short summary
12 Dec 2011
Identifying links between origami and compliant mechanisms
H. C. Greenberg, M. L. Gong, S. P. Magleby, and L. L. Howell
Mech. Sci., 2, 217–225, https://doi.org/10.5194/ms-2-217-2011,https://doi.org/10.5194/ms-2-217-2011, 2011 | 6,196 views
04 Dec 2012
Dynamics of a gravity car race with application to the Pinewood Derby
B. P. Mann, M. M. Gibbs, and S. M. Sah
Mech. Sci., 3, 73–84, https://doi.org/10.5194/ms-3-73-2012,https://doi.org/10.5194/ms-3-73-2012, 2012 | 5,717 views
22 Jun 2012
New multiphase choke correlations for a high flow rate Iranian oil field
M. Safar Beiranvand, P. Mohammadmoradi, B. Aminshahidy, B. Fazelabdolabadi, and S. Aghahoseini
Mech. Sci., 3, 43–47, https://doi.org/10.5194/ms-3-43-2012,https://doi.org/10.5194/ms-3-43-2012, 2012 | 5,703 views
04 Mar 2019
Origami fold states: concept and design tool
Alex Avila, Spencer P. Magleby, Robert J. Lang, and Larry L. Howell
Mech. Sci., 10, 91–105, https://doi.org/10.5194/ms-10-91-2019,https://doi.org/10.5194/ms-10-91-2019, 2019 | 5,525 views
Short summary
18 Feb 2013
Reaction Null Space of a multibody system with applications in robotics
D. N. Nenchev
Mech. Sci., 4, 97–112, https://doi.org/10.5194/ms-4-97-2013,https://doi.org/10.5194/ms-4-97-2013, 2013 | 5,438 views
28 Mar 2012
Building block method: a bottom-up modular synthesis methodology for distributed compliant mechanisms
G. Krishnan, C. Kim, and S. Kota
Mech. Sci., 3, 15–23, https://doi.org/10.5194/ms-3-15-2012,https://doi.org/10.5194/ms-3-15-2012, 2012 | 5,418 views
12 Feb 2013
CHRONO: a parallel multi-physics library for rigid-body, flexible-body, and fluid dynamics
H. Mazhar, T. Heyn, A. Pazouki, D. Melanz, A. Seidl, A. Bartholomew, A. Tasora, and D. Negrut
Mech. Sci., 4, 49–64, https://doi.org/10.5194/ms-4-49-2013,https://doi.org/10.5194/ms-4-49-2013, 2013 | 5,391 views
27 Feb 2018
Module-based structure design of wheeled mobile robot
Zirong Luo, Jianzhong Shang, Guowu Wei, and Lei Ren
Mech. Sci., 9, 103–121, https://doi.org/10.5194/ms-9-103-2018,https://doi.org/10.5194/ms-9-103-2018, 2018 | 5,324 views
Short summary
18 Mar 2020
A bistable mechanism with linear negative stiffness and large in-plane lateral stiffness: design, modeling and case studies
Zhanfeng Zhou, Yongzhuo Gao, Lining Sun, Wei Dong, and Zhijiang Du
Mech. Sci., 11, 75–89, https://doi.org/10.5194/ms-11-75-2020,https://doi.org/10.5194/ms-11-75-2020, 2020 | 4,840 views
Short summary
26 Mar 2018
Design and development of a novel monolithic compliant XY stage with centimeter travel range and high payload capacity
Shixun Fan, Hua Liu, and Dapeng Fan
Mech. Sci., 9, 161–176, https://doi.org/10.5194/ms-9-161-2018,https://doi.org/10.5194/ms-9-161-2018, 2018 | 4,825 views
Short summary
07 Jan 2019
Mechanism design and analysis of a proposed wheelchair-exoskeleton hybrid robot for assisting human movement
Zhibin Song, Chuanyin Tian, and Jian S. Dai
Mech. Sci., 10, 11–24, https://doi.org/10.5194/ms-10-11-2019,https://doi.org/10.5194/ms-10-11-2019, 2019 | 4,693 views
28 May 2018
Worm gear efficiency model considering misalignment in electric power steering systems
Seong Han Kim
Mech. Sci., 9, 201–210, https://doi.org/10.5194/ms-9-201-2018,https://doi.org/10.5194/ms-9-201-2018, 2018 | 4,688 views
Short summary
20 Nov 2018
Kinematic analysis and optimization of a planar parallel compliant mechanism for self-alignment knee exoskeleton
Yijun Niu, Zhibin Song, and Jiansheng Dai
Mech. Sci., 9, 405–416, https://doi.org/10.5194/ms-9-405-2018,https://doi.org/10.5194/ms-9-405-2018, 2018 | 4,653 views
Short summary
23 Apr 2018
A Modified Prandtl-Ishlinskii Hysteresis Modeling Method with Load-dependent Delay for Characterizing Magnetostrictive Actuated Systems
Ying Feng, Zhi Li, Subhash Rakheja, and Hui Jiang
Mech. Sci., 9, 177–188, https://doi.org/10.5194/ms-9-177-2018,https://doi.org/10.5194/ms-9-177-2018, 2018 | 4,640 views
04 Jan 2018
Continuous Static Gait with Twisting Trunk of a Metamorphic Quadruped Robot
Chunsong Zhang and Jian S. Dai
Mech. Sci., 9, 1–14, https://doi.org/10.5194/ms-9-1-2018,https://doi.org/10.5194/ms-9-1-2018, 2018 | 4,395 views
Short summary
20 Jul 2018
Analysis of Burr Formation in Low Speed Micro-milling of Titanium Alloy (Ti-6Al-4V)
Gulfam Ul Rehman, Syed Husain Imran Jaffery, Mushtaq Khan, Liaqat Ali, Ashfaq Khan, and Shahid Ikramullah Butt
Mech. Sci., 9, 231–243, https://doi.org/10.5194/ms-9-231-2018,https://doi.org/10.5194/ms-9-231-2018, 2018 | 4,383 views
Short summary
15 Oct 2013
New empirical stiffness equations for corner-filleted flexure hinges
Q. Meng, Y. Li, and J. Xu
Mech. Sci., 4, 345–356, https://doi.org/10.5194/ms-4-345-2013,https://doi.org/10.5194/ms-4-345-2013, 2013 | 4,376 views
24 Apr 2018
Structural analysis of traditional Chinese hidden-keyhole padlocks
Kuo-Hung Hsiao
Mech. Sci., 9, 189–199, https://doi.org/10.5194/ms-9-189-2018,https://doi.org/10.5194/ms-9-189-2018, 2018 | 4,338 views
Short summary
07 Feb 2018
Design and evaluation of a continuum robot with extendable balloons
Efe Yamac Yarbasi and Evren Samur
Mech. Sci., 9, 51–60, https://doi.org/10.5194/ms-9-51-2018,https://doi.org/10.5194/ms-9-51-2018, 2018 | 4,319 views
Short summary
26 Feb 2013
A new variable stiffness suspension system: passive case
O. M. Anubi, D. R. Patel, and C. D. Crane III
Mech. Sci., 4, 139–151, https://doi.org/10.5194/ms-4-139-2013,https://doi.org/10.5194/ms-4-139-2013, 2013 | 4,280 views
13 Mar 2019
Design of a robot-assisted exoskeleton for passive wrist and forearm rehabilitation
Mehmet Erkan Kütük, Lale Canan Dülger, and Memik Taylan Daş
Mech. Sci., 10, 107–118, https://doi.org/10.5194/ms-10-107-2019,https://doi.org/10.5194/ms-10-107-2019, 2019 | 4,278 views
Short summary
09 Jan 2018
A novel non-contact measuring system for the thread profile of a ball screw
Leilei Zhao, Hutian Feng, and Qianfeng Rong
Mech. Sci., 9, 15–24, https://doi.org/10.5194/ms-9-15-2018,https://doi.org/10.5194/ms-9-15-2018, 2018 | 4,271 views
Short summary
04 Apr 2019
Quasi-static axial crushing of hexagonal origami crash boxes as energy absorption devices
Jiayao Ma, Huaping Dai, Mengyan Shi, Lin Yuan, Yan Chen, and Zhong You
Mech. Sci., 10, 133–143, https://doi.org/10.5194/ms-10-133-2019,https://doi.org/10.5194/ms-10-133-2019, 2019 | 4,270 views
08 Jun 2018
Hysteresis analysis of a notched continuum manipulator driven by tendon
Hong-Jian Yu, Wen-Long Yang, Zheng-Xin Yang, Wei Dong, Zhi-Jiang Du, and Zhi-Yuan Yan
Mech. Sci., 9, 211–219, https://doi.org/10.5194/ms-9-211-2018,https://doi.org/10.5194/ms-9-211-2018, 2018 | 4,263 views
02 Mar 2018
Structural integrity investigation for RPV with various cooling water levels under pressurized melting pool
Jianfeng Mao, Yunkai Liu, Shiyi Bao, Lijia Luo, Zhiming Lu, and Zengliang Gao
Mech. Sci., 9, 147–160, https://doi.org/10.5194/ms-9-147-2018,https://doi.org/10.5194/ms-9-147-2018, 2018 | 4,227 views
Short summary
31 Jan 2018
A self-adjusting stiffness center design for large stroke compliant XY nanomanipulators
Zhiqing Liu, Zhen Zhang, and Peng Yan
Mech. Sci., 9, 41–50, https://doi.org/10.5194/ms-9-41-2018,https://doi.org/10.5194/ms-9-41-2018, 2018 | 4,076 views
Short summary
07 Mar 2016
Towards developing product applications of thick origami using the offset panel technique
Michael R. Morgan, Robert J. Lang, Spencer P. Magleby, and Larry L. Howell
Mech. Sci., 7, 69–77, https://doi.org/10.5194/ms-7-69-2016,https://doi.org/10.5194/ms-7-69-2016, 2016 | 4,057 views
Short summary
15 Nov 2013
Origami-like creases in sheet materials for compliant mechanism design
K. C. Francis, J. E. Blanch, S. P. Magleby, and L. L. Howell
Mech. Sci., 4, 371–380, https://doi.org/10.5194/ms-4-371-2013,https://doi.org/10.5194/ms-4-371-2013, 2013 | 4,008 views
19 Feb 2018
Modelling, simulation and experiment of the spherical flexible joint stiffness
Songyu Li, Liquan Wang, Shaoming Yao, Peng Jia, Feihong Yun, Wenxue Jin, and Dong Lv
Mech. Sci., 9, 81–89, https://doi.org/10.5194/ms-9-81-2018,https://doi.org/10.5194/ms-9-81-2018, 2018 | 3,981 views
Short summary
20 Feb 2018
Mechanical behaviour of a creased thin strip
Jie Liu, Shanqing Xu, Guilin Wen, and Yi Min Xie
Mech. Sci., 9, 91–102, https://doi.org/10.5194/ms-9-91-2018,https://doi.org/10.5194/ms-9-91-2018, 2018 | 3,963 views
Short summary
27 Feb 2018
Tool selection method based on transfer learning for CNC machines
Jingtao Zhou, Han Zhao, Mingwei Wang, and Bingbo Shi
Mech. Sci., 9, 123–146, https://doi.org/10.5194/ms-9-123-2018,https://doi.org/10.5194/ms-9-123-2018, 2018 | 3,935 views
Short summary
19 Nov 2020
Mechanism analysis of ancient Chinese crossbows
Jie Dong, Kan Shi, Yang Zhang, Tenigeer, and Yan'An Yao
Mech. Sci., 11, 437–445, https://doi.org/10.5194/ms-11-437-2020,https://doi.org/10.5194/ms-11-437-2020, 2020 | 3,886 views
17 Oct 2017
Design and evaluation of a new exoskeleton for gait rehabilitation
Ionut Daniel Geonea and Daniela Tarnita
Mech. Sci., 8, 307–321, https://doi.org/10.5194/ms-8-307-2017,https://doi.org/10.5194/ms-8-307-2017, 2017 | 3,884 views
Short summary
14 Feb 2018
Heat transfer and MHD flow of non-newtonian Maxwell fluid through a parallel plate channel: analytical and numerical solution
Alireza Rahbari, Morteza Abbasi, Iman Rahimipetroudi, Bengt Sundén, Davood Domiri Ganji, and Mehdi Gholami
Mech. Sci., 9, 61–70, https://doi.org/10.5194/ms-9-61-2018,https://doi.org/10.5194/ms-9-61-2018, 2018 | 3,858 views
Short summary
06 Jun 2011
On mechanical properties of planar flexure hinges of compliant mechanisms
F. Dirksen and R. Lammering
Mech. Sci., 2, 109–117, https://doi.org/10.5194/ms-2-109-2011,https://doi.org/10.5194/ms-2-109-2011, 2011 | 3,842 views
23 Apr 2020
Code-to-code verification for thermal models of melting and solidification in a metal alloy: comparisons between a Finite Volume Method and a Finite Element Method
Anna M. V. Harley, Sagar H. Nikam, Hao Wu, Justin Quinn, and Shaun McFadden
Mech. Sci., 11, 125–135, https://doi.org/10.5194/ms-11-125-2020,https://doi.org/10.5194/ms-11-125-2020, 2020 | 3,825 views
Short summary
28 Aug 2018
Mechatronic design and genetic-algorithm-based MIMO fuzzy control of adjustable-stiffness tendon-driven robot finger
Izzat Al-Darraji, Ali Kılıç, and Sadettin Kapucu
Mech. Sci., 9, 277–296, https://doi.org/10.5194/ms-9-277-2018,https://doi.org/10.5194/ms-9-277-2018, 2018 | 3,819 views
Short summary
19 Feb 2021
Historical development of water-powered mechanical clocks
Zheng-Hui Hwang, Hong-Sen Yan, and Tsung-Yi Lin
Mech. Sci., 12, 203–219, https://doi.org/10.5194/ms-12-203-2021,https://doi.org/10.5194/ms-12-203-2021, 2021 | 3,781 views
Short summary
24 Jul 2018
FE analysis of circular CFT columns considering bond-slip effect: A numerical formulation
Ju-Young Hwang and Hyo-Gyoung Kwak
Mech. Sci., 9, 245–257, https://doi.org/10.5194/ms-9-245-2018,https://doi.org/10.5194/ms-9-245-2018, 2018 | 3,761 views
Short summary
05 Oct 2018
Novel compliant wiper mechanism
Raşit Karakuş and Engin Tanık
Mech. Sci., 9, 327–336, https://doi.org/10.5194/ms-9-327-2018,https://doi.org/10.5194/ms-9-327-2018, 2018 | 3,749 views
Short summary
20 Nov 2018
detasFLEX – A computational design tool for the analysis of various notch flexure hinges based on non-linear modeling
Stefan Henning, Sebastian Linß, and Lena Zentner
Mech. Sci., 9, 389–404, https://doi.org/10.5194/ms-9-389-2018,https://doi.org/10.5194/ms-9-389-2018, 2018 | 3,689 views
Short summary
CC BY 4.0