Christen,
G. and Pfefferkorn, H.: Nachgiebige Mechanismen: Aufbau, Gestaltung,
Dimensionierung und experimentelle Untersuchung, VDI-Berichte Nr. 1423,
VDI-Getriebetagung, Kassel, Germany, 309–329, 1998.
Culpepper, M. L. and Kim, S.: A Framework and Design Sythesis Tool Used to
Generate, Evaluate and Optimize Compliant Mechanism Concepts for Research and
Education Activities, ASME 2004 International Design Engineering Technical
Conferences & Computers and Information in Engineering Conference, Salt
Lake City, Utah, 1583–1588, https://doi.org/10.1115/DETC2004-57606, 2004.
De Bona, F. and Munteanu, M. G.: Optimized Flexural Hinges for Compliant
Micromechanisms, Analog Integr. Circ S., 44, 163–174,
https://doi.org/10.1007/s10470-005-2597-7, 2005.
Desrochers, S.: Optimum design of simplical uniaxial accelerometers, master
thesis, McGill University, Montréal, 2008.
Dirksen, F. and Lammering, R.: On mechanical properties of planar flexure
hinges of compliant mechanisms, Mech. Sci., 2, 109–117,
https://doi.org/10.5194/ms-2-109-2011, 2011.
Gräser, P., Linß, S., Zentner, L., and Theska, R.: Design and
Experimental Characterization of a Flexure Hinge-Based Parallel Four-Bar
Mechanism for Precision Guides, Microactuators and Micromechanisms,
Mechanisms and Machine Science, 45, Springer, Cham, 139–152,
https://doi.org/10.1007/978-3-319-45387-3_13, 2017.
Gräser, P., Linß, S., Zentner, L., and Theska, R.: Optimization of
Compliant Mechanisms by Use of Different Polynomial Flexure Hinge Contours,
in: 3rd IAK, Interdisciplinary Applications of Kinematics, Lima, Peru,
5–7 March 2018.
Henein,
S., Spanoudakis, P., Droz, S., Myklebust, L. I., and Onillon, E.: Flexure
pivot for aerospace mechanisms, 10th European Space Mechanisms and Tribology
Symposium, San Sebastian, Spain, 2003.
Henning, S. and Linß, S.: detasFLEX – Design tool for the analysis and
synthesis of flexure hinges, available at: https://www.tu-ilmenau.de/nsys/download/detasflex, last access: 14 November 2018.
Horie,
M., Nozaki, T., Ikegami, K., and Kobayashi, F.: Design System of Superelastic
Hinges and Its Application to Micromanipulators, JSME Int. J., 40, 323–328,
https://doi.org/10.1299/jsmec.40.323, 1997.
Ivanov,
I.: Methodical Development of a Parallel Kinematic Positioning System Based
on Monolithic Structures with Flexure Hinges, doctoral thesis, RWTH Aachen,
Aachen, https://doi.org/10.18154/RWTH-2016-11304, 2016.
Janssen,
H.: Flexure hinge or elastic hinge, available at:
https://www.janssenprecisionengineering.com/page/flexure-hinge-or-elastic-hinge,
last access: 23 July 2018.
Li, Q.,
Pan, C., and Xu, X.: Closed-form compliance equations for
power-function-shaped flexure hinge based on unit-load method, Precis. Eng.,
37, 135–145, https://doi.org/10.1016/j.precisioneng.2012.07.010, 2013.
Lin, R.,
Zhang, X., Long, X., and Fatikow, S.: Hybrid flexure hinges, Rev. Sci.
Instrum., 84, 085004, https://doi.org/10.1063/1.4818522, 2013.
Linß, S.: Ein Beitrag zur geometrischen Gestaltung und Optimierung
prismatischer Festkörpergelenke in nachgiebigen Koppelmechanismen,
doctoral thesis, TU Ilmenau, Ilmenau,
nbn-resolving.de/urn:nbn:de:gbv:ilm1-2015000283, 2015.
Linß, S., Erbe, T., and Zentner, L.: On polynomial flexure hinges for
increased deflection and an approach for simplified manufacturing, 13
th
World Congress in Mechanism and Machine Science, Guanajuato, Mexico,
A11_512, available at:
http://www.dmg-lib.org/dmglib/handler?docum=22411009 (last access:
7 August 2018), 2011a.
Linß,
S., Erbe, T., Theska, R., and Zentner, L.: The influence of asymmetric
flexure hinges on the axis of rotation, 56th International Scientific
Colloquium, Ilmenau, Germany,
nbn-resolving.de/urn:nbn:de:gbv:ilm1-2011iwk-006:6, 2011b.
Linß,
S., Milojevic, A., Pavlovic, N. D., and Zentner, L.: Synthesis of Compliant
Mechanisms based on Goal-Oriented Design Guidelines for Prismatic Flexure
Hinges with Polynomial Contours, 14th World Congress in Mechanism and Machine
Science, Taipei, Taiwan, https://doi.org/10.6567/IFToMM.14TH.WC.PS10.008, 2015.
Linß, S., Schorr, P., and Zentner, L.: General design equations for the
rotational stiffness, maximal angular deflection and rotational precision of
various notch flexure hinges, Mech. Sci., 8, 29–49,
https://doi.org/10.5194/ms-8-29-2017, 2017a.
Linß,
S., Schorr, P., Henning, S., and Zentner, L.: Contour-independent Design
Equations For The Calculation Of The Rotational Properties Of Commonly Used
And Polynomial Flexure Hinges, 59th Ilmenau Scientific Colloquium, Ilmenau,
Germany, nbn-resolving.de/urn:nbn:de:gbv:ilm1-2017iwk-001:5, 2017b.
Linß,
S., Gräser, P., Räder, T., Henning, S., Theska, R., and Zentner, L.:
Influence of geometric scaling on the elasto-kinematic properties of flexure
hinges and compliant mechanisms, Mech. Mach. Theory, 125, 220–239,
https://doi.org/10.1016/j.mechmachtheory.2018.03.008, 2018.
Lobontiu,
N.: Compliant Mechanisms: Design of Flexure Hinges, CRC Press, Boca Raton,
Fla., 2003.
Lobontiu,
N., Cullin, M., Ali, M., and Brock, J. M.: A generalized analytical
compliance model for transversely symmetric three-segment flexure hinges,
Rev. Sci. Instrum., 82, 105116, https://doi.org/10.1063/1.3656075, 2011.
Megaro,
V., Zehnder, J., Bächer, M., Coros, S., Gross, M., and Thomaszewski, B.:
A Computational Design Tool for Compliant Mechanisms, ACM Trans. Graph., 36,
1–12, https://doi.org/10.1145/3072959.3073636, 2017.
Meng, Q., Li, Y., and Xu, J.: New empirical stiffness equations for
corner-filleted flexure hinges, Mech. Sci., 4, 345–356,
https://doi.org/10.5194/ms-4-345-2013, 2013.
Palmieri,
G., Palpacelli, M. C., and Callegari, M.: Study of a Fully Compliant U-Joint
Designed for Minirobotics Applications, J. Mech. Des., 134, 111003–111004,
https://doi.org/10.1063/1.3137074, 2012.
Pei, X. and Yu, J.: ADLIF: a new large-displacement beam-based flexure joint,
Mech. Sci., 2, 183–188, https://doi.org/10.5194/ms-2-183-2011, 2011.
Schotborgh, W. O., Kokkeler, F. G., Tragter, H., and van Houten, F. J. A. M.:
Dimensionless design graphs for flexure elements and a comparison between
three flexure elements, Precis. Eng., 29, 41–47,
https://doi.org/10.1016/j.precisioneng.2004.04.003, 2005.
Smith, S. T.: Flexures: elements of elastic mechanisms, Gordon & Breach,
Amsterdam, 2000.
Smith, S. T., Chetwynd, D. G., and Bowen, D. K.: Design and assessment of
monolithic high precision translation mechanisms, J. Phys. E, 8, 977–983,
https://doi.org/10.1088/0022-3735/20/8/005, 1987.
Smith, S. T., Badami, V. G., Dale, J. S., and Xu, Y.: Elliptical flexure
hinges, Rev. Sci. Instrum., 68, 1474–1483, https://doi.org/10.1063/1.1147635, 1997.
Tian, Y., Shirinzadeh, B., Zhang, D., and Zhong, Y.: Three flexure hinges for
compliant mechanism designs based on dimensionless graph analysis, Precis.
Eng., 34, 92–101, https://doi.org/10.1016/j.precisioneng.2009.03.004, 2010.
Tseytlin, Y. M.: Notch flexure hinges: An effective theory, Rev. Sci.
Instrum., 73, 3363–3368, https://doi.org/10.1063/1.1499761, 2002.
Turkkan, O. A. and Su, H.-J.: DAS-2D: A concept design tool for compliant
mechanisms, Mech. Sci., 7, 135–148, https://doi.org/10.5194/ms-7-135-2016, 2016.
Vallance, R. R., Haghighian, B., and Marsh, E. R.: A unified geometric model
for designing elastic pivots, Precis. Eng., 32, 278–288,
https://doi.org/10.1016/j.precisioneng.2007.10.001, 2008.
van Beek, A.: Calculator for a single notched hinge, available at:
http://www.tribology-abc.com/calculators/c14_2.htm, last access:
23 July 2018.
Venanzi, S., Giesen, P., and Parenti-Castelli, V.: A novel technique for
position analysis of planar compliant mechanisms, Mech. Mach. Theory, 40,
1224–1239, https://doi.org/10.1016/j.mechmachtheory.2005.01.009, 2005.
Vink, J.: Vink, System Design & Analysis - Calculating flexure hinges,
available at:
https://www.vinksda.nl/toolkit-mechanical-calculations/calculating-flexure-hinges,
last access: 23 July 2018.
Wang, R., Zhou, X., and Zhu, Z.: Development of a novel sort of
exponent-sine-shaped flexure hinges, Rev. Sci. Instrum., 84, 095008,
https://doi.org/10.1063/1.4821940, 2013.
Wu, Y. and Zhou, Z.: Design calculations for flexure hinges, Rev. Sci.
Instrum., 73, 3101, https://doi.org/10.1063/1.1494855, 2002.
Yong, Y. K., Lu, T.-F., and Handley, D. C.: Review of circular flexure hinge
design equations and derivation of empirical formulations, Precis. Eng., 32,
63–70, https://doi.org/10.1016/j.precisioneng.2007.05.002, 2008.
Zelenika,
S., Munteanu, M. G., and Bona, F. De: Optimized flexural hinge shapes for
microsystems and high-precision applications, Mech. Mach. Theory, 44,
1826–1839, https://doi.org/10.1016/j.mechmachtheory.2009.03.007, 2009.
Zentner,
L.: Nachgiebige Mechanismen, De Gruyter Oldenbourg, München, 2014.
Zentner, L., Griebel, S., Wystup, C., Hügl, S., Rau, T. S., and Majdani,
O.: Synthesis process of a compliant fluidmechanical actuator for use as an
adaptive electrode carrier for cochlear implants, Mech. Mach. Theory, 112,
155–171, https://doi.org/10.1016/j.mechmachtheory.2017.02.001, 2017.
Zettl,
B., Szyszkowski, W., and Zhang, W. J.: On Systematic Errors of
Two-Dimensional Finite Element Modeling of Right Circular Planar Flexure
Hinges, J. Mech. Des., 127, 782–787, https://doi.org/10.1115/1.1898341, 2005.
Zhu, B.
L., Zhang, X. M., and Fatikow, S.: Design of single-axis flexure hinges using
continuum topology optimization method, Sci. China Technol. Sci., 57,
560–567, https://doi.org/10.1007/s11431-013-5446-4, 2014.
