Journal cover Journal topic
Mechanical Sciences An open-access journal for theoretical and applied mechanics
Journal topic

Journal metrics

Journal metrics

  • IF value: 1.352 IF 1.352
  • IF 5-year value: 1.615 IF 5-year 1.615
  • CiteScore value: 1.48 CiteScore 1.48
  • SNIP value: 0.965 SNIP 0.965
  • SJR value: 0.288 SJR 0.288
  • IPP value: 1.08 IPP 1.08
  • h5-index value: 12 h5-index 12
  • Scimago H index value: 11 Scimago H index 11
Supported by
Logo Library of Delft University of Technology Logo NWO
Affiliated to
Logo iftomm
Volume 9, issue 2
Mech. Sci., 9, 373-387, 2018
https://doi.org/10.5194/ms-9-373-2018
© Author(s) 2018. This work is distributed under
the Creative Commons Attribution 4.0 License.
Mech. Sci., 9, 373-387, 2018
https://doi.org/10.5194/ms-9-373-2018
© Author(s) 2018. This work is distributed under
the Creative Commons Attribution 4.0 License.

Research article 16 Nov 2018

Research article | 16 Nov 2018

Rotational Constraint between Beams in 3-D Space

Hamid Reza Motamedian and Artem Kulachenko Hamid Reza Motamedian and Artem Kulachenko
  • Department of Solid Mechanics, Royal Institute of Technology (KTH), 10044 Stockholm, Sweden

Abstract. In this paper, we develop two alternative formulations for the rotational constraint between the tangents to connected beams with large deformations in 3-D space. Such a formulation is useful for modeling bonded/welded connections between beams. The first formulation is derived by consistently linearizing the variation of the strain energy and by assuming linear shape functions for the beam elements. This formulation can be used with both the Lagrange multiplier and the penalty stiffness method. The second non-consistent formulation assumes that the contact normal is independent of the nodal displacements at each iteration, and is updated consistently between iterations. In other words, we ignore the contribution due to the change of the contact normal in the linearization of the contact gap function. This assumption yields simpler equations and requires no specific assumption regarding the shape functions for the underlying beam elements. However, it is limited to the penalty method. We demonstrate the performance of the presented formulations in solving problems using implicit time integration. We also present a case showing the implications of ignoring this rotational constraint in modeling a network of beams.

Publications Copernicus
Download
Short summary
This paper presents a way to model the rotational constraint between beam elements in 3-D space. Beam elements are models used to simulate the behavior of slender objects. Such objects can be found for e.g. in bridges, space structures, robots, and networks of fibers (paper, cloth, biological tissue, etc). In many cases, beam elements are welded or bonded together. To model this bonding, the relative displacements and rotations shall be limited at the contact point using appropriate constraints.
This paper presents a way to model the rotational constraint between beam elements in 3-D space....
Citation
Share