Journal cover Journal topic
Mechanical Sciences An open-access journal for theoretical and applied mechanics

Journal metrics

  • IF value: 1.211 IF 1.211
  • IF 5-year<br/> value: 1.705 IF 5-year
    1.705
  • SNIP value: indexed SNIP
    indexed
  • SJR value: indexed SJR
    indexed
  • IPP value: indexed IPP
    indexed
  • h5-index value: 15 h5-index 15
Supported by
Logo Library of Delft University of Technology
Logo NWO
Affiliated to
Logo iftomm

Volume 6, issue 2

Volume 6, issue 2

03 Jul 2015
Influence of gear loss factor on the power loss prediction
C. M. C. G. Fernandes, P. M. T. Marques, R. C. Martins, and J. H. O. Seabra
Mech. Sci., 6, 81-88, https://doi.org/10.5194/ms-6-81-2015, 2015
10 Jul 2015
Analytical model of temperature distribution in metal cutting based on Potential Theory
F. Klocke, M. Brockmann, S. Gierlings, and D. Veselovac
Mech. Sci., 6, 89-94, https://doi.org/10.5194/ms-6-89-2015, 2015
14 Jul 2015
Modeling and control of piezoelectric inertia–friction actuators: review and future research directions
Y. F. Liu, J. Li, X. H. Hu, Z. M. Zhang, L. Cheng, Y. Lin, and W. J. Zhang
Mech. Sci., 6, 95-107, https://doi.org/10.5194/ms-6-95-2015, 2015
24 Jul 2015
Flexibility oriented design of a horizontal wrapping machine
H. Giberti and A. Pagani
Mech. Sci., 6, 109-118, https://doi.org/10.5194/ms-6-109-2015, 2015
04 Aug 2015
Hybrid Position-Force Control of a Cable-Driven Parallel Robot with Experimental Evaluation
W. Kraus, P. Miermeister, V. Schmidt, and A. Pott
Mech. Sci., 6, 119-125, https://doi.org/10.5194/ms-6-119-2015, 2015
11 Aug 2015
An analysis of the particulate flow in cold spray nozzles
M. Meyer and R. Lupoi
Mech. Sci., 6, 127-136, https://doi.org/10.5194/ms-6-127-2015, 2015
12 Aug 2015
Representation of the kinematic topology of mechanisms for kinematic analysis
A. Müller
Mech. Sci., 6, 137-146, https://doi.org/10.5194/ms-6-137-2015, 2015
20 Aug 2015
Three-dimensional finite element model of the drilling process used for fixation of Salter–Harris type-3 fractures by using a K-wire
A. Gok, K. Gok, and M. B. Bilgin
Mech. Sci., 6, 147-154, https://doi.org/10.5194/ms-6-147-2015, 2015
25 Aug 2015
Synthesis of PR-/RP-chain-based compliant mechanisms – design of applications exploiting fibre reinforced material characteristics
U. Hanke, E.-C. Lovasz, M. Zichner, N. Modler, A. Comsa, and K.-H. Modler
Mech. Sci., 6, 155-161, https://doi.org/10.5194/ms-6-155-2015, 2015
01 Sep 2015
B-spline parameterized optimal motion trajectories for robotic systems with guaranteed constraint satisfaction
W. Van Loock, G. Pipeleers, and J. Swevers
Mech. Sci., 6, 163-171, https://doi.org/10.5194/ms-6-163-2015, 2015
09 Sep 2015
Biomechanical comparison using finite element analysis of different screw configurations in the fixation of femoral neck fractures
K. Gok and S. Inal
Mech. Sci., 6, 173-179, https://doi.org/10.5194/ms-6-173-2015, 2015
11 Sep 2015
Experimental study on transient behavior of embedded spiral-coil heat exchanger
E. I. Jassim
Mech. Sci., 6, 181-190, https://doi.org/10.5194/ms-6-181-2015, 2015
11 Sep 2015
A two-stage calibration method for industrial robots with joint and drive flexibilities
M. Neubauer, H. Gattringer, A. Müller, A. Steinhauser, and W. Höbarth
Mech. Sci., 6, 191-201, https://doi.org/10.5194/ms-6-191-2015, 2015
22 Sep 2015
Numerical simulation of buckling behavior of the buried steel pipeline under reverse fault displacement
J. Zhang, Z. Liang, C. J. Han, and H. Zhang
Mech. Sci., 6, 203-210, https://doi.org/10.5194/ms-6-203-2015, 2015
01 Oct 2015
Shape and force analysis of capillary bridge between two slender structured surfaces
Z. F. Zhu, J. Y. Jia, H. Z. Fu, Y. L. Chen, Z. Zeng, and D. L. Yu
Mech. Sci., 6, 211-220, https://doi.org/10.5194/ms-6-211-2015, 2015
07 Oct 2015
Thermal analysis of PCM containing heat exchanger enhanced with normal annular fines
M. J. Hosseini, M. Rahimi, and R. Bahrampoury
Mech. Sci., 6, 221-234, https://doi.org/10.5194/ms-6-221-2015, 2015
21 Oct 2015
Coupled dynamic model and vibration responses characteristic of a motor-driven flexible manipulator system
Y. F. Liu, W. Li, X. F. Yang, Y. Q. Wang, M. B. Fan, and G. Ye
Mech. Sci., 6, 235-244, https://doi.org/10.5194/ms-6-235-2015, 2015
26 Oct 2015
Successive dynamic programming and subsequent spline optimization for smooth time optimal robot path tracking
M. Oberherber, H. Gattringer, and A. Müller
Mech. Sci., 6, 245-254, https://doi.org/10.5194/ms-6-245-2015, 2015
10 Dec 2015
The intradiscal failure pressure on porcine lumbar intervertebral discs: an experimental approach
A. R. G. Araújo, N. Peixinho, A. Pinho, and J. C. P. Claro
Mech. Sci., 6, 255-263, https://doi.org/10.5194/ms-6-255-2015, 2015
CC BY 4.0
Publications Copernicus