36 citations as recorded by crossref.

1. Thermal management of electronics devices with PCMs filled pin-fin heat sinks: A comparison H. Ali et al. 10.1016/j.ijheatmasstransfer.2017.10.065
2. Heat transfer augmentation in single and multiple (cascade) phase change materials based thermal energy storage: Research progress, challenges, and recommendations S. Jain et al. 10.1016/j.seta.2021.101633
3. Experimental investigation of n-eicosane based circular pin-fin heat sinks for passive cooling of electronic devices H. Ali & A. Arshad 10.1016/j.ijheatmasstransfer.2017.05.004
4. Melting characteristics of concentric and eccentric inner elliptic tube in double tube latent heat energy storage unit M. Alnakeeb et al. 10.1016/j.aej.2023.05.001
5. Influences of the number and length of longitudinal fins on the single and cyclic charging and discharging performance of vertical double-tube latent heat storage systems E. ELSihy et al. 10.1016/j.est.2024.111393
6. A novel synthetic jet based heat sink with PCM filled cylindrical fins for efficient electronic cooling V. Arumuru et al. 10.1016/j.est.2022.106376
7. Heat transfer enhancement technology for fins in phase change energy storage X. Zhu et al. 10.1016/j.est.2022.105833
8. Methods to Characterize Effective Thermal Conductivity, Diffusivity and Thermal Response in Different Classes of Composite Phase Change Materials E. Gariboldi et al. 10.3390/ma12162552
9. Thermal Energy Storage and Heat Transfer of Nano-Enhanced Phase Change Material (NePCM) in a Shell and Tube Thermal Energy Storage (TES) Unit with a Partial Layer of Eccentric Copper Foam M. Ghalambaz et al. 10.3390/molecules26051491
10. Design of Radially Variant Phase‐Change Material Composites A. Hoe et al. 10.1002/adem.202200841
11. Management of electronic board temperature using heat sink containing pure and microencapsulated phase change materials F. Rostamian et al. 10.1016/j.icheatmasstransfer.2021.105407
12. Thermodynamic analysis of a packed bed latent heat thermal storage system simulated by an effective packed bed model R. Pakrouh et al. 10.1016/j.energy.2017.08.055
13. Micro/nano-encapsulated phase-change materials (ePCMs) for solar photothermal absorption and storage: Fundamentals, recent advances, and future directions S. Albdour et al. 10.1016/j.pecs.2022.101037
14. Application of an improved latent heat storage system in the food packaging S. Rahimi-Khoigani et al. 10.1016/j.jfoodeng.2022.111351
15. Geometric and design parameters of fins employed for enhancing thermal energy storage systems: a review A. Abdulateef et al. 10.1016/j.rser.2017.07.009
16. Topology optimization of a rectangular phase change material module B. Peremans et al. 10.1016/j.est.2023.107891
17. Modelling the conditions for natural convection onset in open-cell porous Al/paraffin composite phase change materials: Effects of temperature, paraffin type and metallic structure geometry Z. Li & E. Gariboldi 10.1016/j.ijheatmasstransfer.2021.121279
18. Inner pipe downward movement effect on melting of PCM in a double pipe heat exchanger Y. Pahamli et al. 10.1016/j.amc.2017.07.066
19. Liquid metal enabled combinatorial heat transfer science: toward unconventional extreme cooling X. Yang & J. Liu 10.1007/s11708-017-0521-3
20. Experimental investigation of the simultaneous effect of using phase change material/plate-fin heat sink on thermal performance of a power supply unit R. Hemati et al. 10.1016/j.seta.2022.102009
21. Analysis of the effect of eccentricity and operational parameters in PCM-filled single-pass shell and tube heat exchangers Y. Pahamli et al. 10.1016/j.renene.2016.05.090
22. Heat transfer features in a PCM-based system under the time-dependent thermal load N. Bondareva & M. Sheremet 10.1088/1742-6596/1565/1/012078
23. Using of phase change materials to enhance the thermal performance of micro channel heat sink M. Hasan & H. Tbena 10.1016/j.jestch.2018.03.017
24. Evaluation and optimization of low melting point metal PCM heat sink against ultra-high thermal shock X. Yang et al. 10.1016/j.applthermaleng.2017.03.050
25. Does nanoparticles dispersed in a phase change material improve melting characteristics? R. Farsani et al. 10.1016/j.icheatmasstransfer.2017.10.006
26. Selection principles and thermophysical properties of high temperature phase change materials for thermal energy storage: A review G. Wei et al. 10.1016/j.rser.2017.05.271
27. Objective oriented phase change material composite heat sink design A. Hoe et al. 10.1016/j.applthermaleng.2022.118235
28. Recent Progress and Challenges in MXene-Based Phase Change Material for Solar and Thermal Energy Applications H. Awan et al. 10.3390/en16041977
29. Improved performance of latent heat energy storage systems utilizing high thermal conductivity fins: A review N. Dhaidan & J. Khodadadi 10.1063/1.4989738
30. Enhancing the performance of concentrator photovoltaic systems using Nanoparticle-phase change material heat sinks I. Zarma et al. 10.1016/j.enconman.2018.10.055
31. Influence of the Fin Shape on Heat Transport in Phase Change Material Heat Sink with Constant Heat Loads N. Bondareva et al. 10.3390/en14051389
32. Application of TCE-PCM based heat sinks for cooling of electronic components: A review S. Sahoo et al. 10.1016/j.rser.2015.12.238
33. Numerical simulation of melting between two elliptical cylinders M. Faghani et al. 10.1016/j.aej.2017.02.003
34. Thermal analysis of PCM containing heat exchanger enhanced with normal annular fines M. Hosseini et al. 10.5194/ms-6-221-2015
35. Conduction-based charging maps for latent heat storages B. Peremans et al. 10.1016/j.est.2022.104036
36. Recent progresses and achievements in photovoltaic-phase change material technology: A review with special treatment on photovoltaic thermal-phase change material systems M. Islam et al. 10.1016/j.enconman.2016.07.075