16 citations as recorded by crossref.

1. Spline-Based Trajectory Generation for CNC Machines T. Mercy et al. 10.1109/TIE.2018.2874617
2. An approximate characterisation of the set of feasible trajectories for constrained flat systems L. Greco et al. 10.1016/j.automatica.2022.110484
3. Spline-Based Motion Planning for Autonomous Guided Vehicles in a Dynamic Environment T. Mercy et al. 10.1109/TCST.2017.2739706
4. Minimum-Time Trajectory Planning Under Intermittent Measurements B. Penin et al. 10.1109/LRA.2018.2883375
5. Optimal autonomous multirotor motion planning in an obstructed environment E. de Angelis et al. 10.1016/j.ast.2019.03.017
6. Optimization-Based Multipoint Trajectory Planning Along Straight Lines for Tower Cranes M. Burkhardt et al. 10.1109/TCST.2023.3308762
7. A spline-based approach to smooth and time-optimal trajectory generation for CNC machines with guaranteed kinematic constraints M. Paing & N. Uchiyama 10.1007/s00170-022-09517-1
8. Terminal force soft sensing of hydraulic manipulator based on the parameter identification R. Ding et al. 10.1016/j.measurement.2022.111551
9. Minimum-time B-spline trajectories with corridor constraints. Application to cinematographic quadrotor flight plans G. Rousseau et al. 10.1016/j.conengprac.2019.05.022
10. Motion planning for intersection turning of heavy-duty autonomous vehicles using vehicle body trajectory prediction and risk potential evaluation Y. HAMAGUCHI et al. 10.1299/transjsme.23-00139
11. Trajektoriengenerator zur Erzeugung beschränkter B-Splines A. Seefried & A. Pfeiffer 10.1515/auto-2019-0067
12. Explicit spline-based continuous-time MPC: a study on design and performance B. Rohaľ-Ilkiv et al. 10.1016/j.ifacol.2020.12.442
13. Distributed MPC for multi-vehicle systems moving in formation R. Van Parys & G. Pipeleers 10.1016/j.robot.2017.08.009
14. Spline-Based Motion Planning in an Obstructed 3D Environment * *This work benefits from KU Leuven-BOF PFV/10/002 Centre of Excellence: Optimization in Engineering (OPTEC), from the Belgian Programme on Interuniversity Attraction Poles, initiated by the Belgian Federal Science Policy Office (DYSCO), from the project G0C4515N of the Research Foundation-Flanders (FWO-Flanders) and the KU Leuven Research project C14/15/067: B-spline based certificates of positivity with applications in engineering. Ruben Van Parys is a PhD fellow of FWO-Flanders. The MECO Research Group is an associated research lab of Flanders MakeThis work benefits from KU Leuven-BOF PFV/10/002 Centre of Excellence: Optimization in Engineering (OPTEC), from the Belgian Programme on Interuniversity Attraction Poles, initiated by the Belgian Federal Science Policy Office (DYSCO), from the project G0C4515N of the Research Foundation-Flanders (FWO-Flanders) and the KU Leuven Research project C14/15/067: B-spline based certificates of positivity with applications in engineering. Ruben Van Parys is a PhD fellow of FWO-Flanders. The MECO Research Group is an associated research lab of Flanders MakeThis work benefits from KU Leuven-BOF PFV/10/002 Centre of Excellence: Optimization in Engineering (OPTEC), from the Belgian Programme on Interuniversity Attraction Poles, initiated by the Belgian Federal Science Policy Office (DYSCO), from the project G0C4515N of the Research Foundation-Flanders (FWO-Flanders) and the KU Leuven Research project C14/15/067: B-spline based certificates of positivity with applications in engineering. Ruben Van Parys is a PhD fellow of FWO-Flanders. The MECO Research Group is an associated research lab of Flanders Make. R. Van Parys & G. Pipeleers 10.1016/j.ifacol.2017.08.1525
15. CasADi: a software framework for nonlinear optimization and optimal control J. Andersson et al. 10.1007/s12532-018-0139-4
16. Low-harmonic trajectory synthesis using trajectory pattern method (TPM) for high-speed and high-precision machinery H. Li et al. 10.5194/ms-12-913-2021