Articles | Volume 3, issue 1
https://doi.org/10.5194/ms-3-1-2012
© Author(s) 2012. This work is distributed under
the Creative Commons Attribution 3.0 License.
the Creative Commons Attribution 3.0 License.
Special issue:
https://doi.org/10.5194/ms-3-1-2012
© Author(s) 2012. This work is distributed under
the Creative Commons Attribution 3.0 License.
the Creative Commons Attribution 3.0 License.
Short Communication: Flexure delicacies
S. Henein
Centre Suisse d'Electronique et de Microtechnique (CSEM SA), Neuchâtel, Switzerland
Related subject area
Mechanisms and Robotics
Kinematic analysis and bearing capacity optimization of fully decoupled two-rotation mechanisms
A convolutional neural-network-based diagnostic framework for industrial bearing
Design and analysis of a dual-rope crawler rope-climbing robot
Visual simultaneous localization and mapping (vSLAM) algorithm based on improved Vision Transformer semantic segmentation in dynamic scenes
Type synthesis of non-overconstrained and overconstrained two rotation and three translation (2R3T) parallel mechanisms with three branched chains
Assistance control strategy for upper-limb rehabilitation robot based on motion trend
Experimental study on fingertip friction perception characteristics on ridged surfaces
Modified control variates method based on second-order saddle-point approximation for practical reliability analysis
Wearable ankle assistance robot for a human walking with different loads
Motion planning and control strategy of a cable-driven body weight support gait training robot
Optimal resource allocation method and fault-tolerant control for redundant robots
Assembly of reconfigurable Bricard-like mechanisms to form a multimode deployable arch
Design and error compensation of a 3-degrees-of-freedom cable-driven hybrid 3D-printing mechanism
Multi-objective optimization design of parallel manipulators using a neural network and principal component analysis
A vision-based robotic system following the human upper-limb sewing action
Gait analysis algorithm for lower limb rehabilitation robot applications
Ellipsoid contact analysis and application in the surface conjugate theory of face gears
Influence of a walking mechanism on the hydrodynamic performance of a high-speed wheeled amphibious vehicle
An investigation into the micro-geometric tapered-shape surface design of the piston bore of a piston–cylinder interface in an axial piston motor
Topology optimization for thermal structures considering design-dependent convection boundaries based on the bidirectional evolutionary structural optimization method
Adaptive chaos control of a humanoid robot arm: a fault-tolerant scheme
Kinematic and dynamic characteristics' analysis of a scissor multi-rod ring deployable mechanism
Synthesis of clearance for a kinematic pair to prevent an overconstrained linkage from becoming stuck
Design of a soft bionic elbow exoskeleton based on shape memory alloy spring actuators
Dimensional synthesis of a spherical linkage crank slider mechanism for motion generation using an optimization algorithm
A versatile end effector for grabbing and spreading of flaky deformable object manipulation
Design and kinematics of a lightweight cruciform continuum robot
Obstacle-avoidance path planning based on the improved artificial potential field for a 5 degrees of freedom bending robot
Parameter optimization of a pure electric sweeper dust port by a backpropagation neural network combined with a whale algorithm
Modeling and control strategy of a haptic interactive robot based on a cable-driven parallel mechanism
Research on obstacle performance and tipping stability of a novel wheel–leg deformation mechanism
Dynamic modeling and vibration characteristics analysis of parallel antenna
Tooth profile design of a novel helical gear mechanism with improved geometry for a parallel shaft transmission
Instability load analysis of a telescopic boom for an all-terrain crane
A real-time and accurate detection approach for bucket teeth falling off based on improved YOLOX
Development of a force-field-based control strategy for an upper-limb rehabilitation robot
Research on structural parameters and kinematic properties of a drill-in granary grain condition detector
The evolution and restoration of European vertically arranged mechanical turret clocks before the 17th century
Surface modification and tooth contact analysis of variable hyperbolic circular-arc-tooth-trace cylindrical gears
Evolution and mechanism configuration synthesis of chamber clocks movement prior to 1700
Analysis of the coaxiality–geometric hysteresis model of a rotate vector reducer based on Ansys Adams
Dynamic modeling and experiment of hind leg swimming of beaver-like underwater robot
Spring efficiency assessment and efficient use of spring methods of statically balanced planar serial manipulators with revolute joints only
Structural analysis of traditional Chinese blocked-keyhole padlocks
TGA-based solutions map method for four-position synthesis of planar 4R linkage
Structural optimization of a pipe-climbing robot based on ANSYS
An innovative device for enlarging the allowable misalignment for screwing tasks
Design and analysis of a hollow-ring permanent magnet brake for robot joints
Design of an origami-based cylindrical deployable mechanism
Electromyogram-based motion compensation control for the upper limb rehabilitation robot in active training
Sen Wang, Xueyan Han, Haoran Li, Hongyu Xu, and Shihua Li
Mech. Sci., 15, 111–121, https://doi.org/10.5194/ms-15-111-2024, https://doi.org/10.5194/ms-15-111-2024, 2024
Short summary
Short summary
In order to meet the need for high accuracy in road spectrum reproduction of vehicle durability tests, this paper is based on analysis of factors affecting the accuracy of a test platform. The large load capacity and fully decoupled mechanism proposed in the research work of this paper can improve the road spectrum reproduction accuracy of the vehicle durability test platform and has good application prospects in the field of vehicle durability tests.
Bowen Yu and Chunli Xie
Mech. Sci., 15, 87–98, https://doi.org/10.5194/ms-15-87-2024, https://doi.org/10.5194/ms-15-87-2024, 2024
Short summary
Short summary
In this study, we introduce an innovative diagnostic framework tailored to industrial bearings that facilitates automated feature extraction and enables end-to-end fault detection. Our validation across multiple bearing vibration datasets confirms the framework's superiority in handling complex and non-stationary signals in industrial environments.
Jinhang Wang, Lairong Yin, Ronghua Du, Long Huang, and Juan Huang
Mech. Sci., 15, 31–45, https://doi.org/10.5194/ms-15-31-2024, https://doi.org/10.5194/ms-15-31-2024, 2024
Short summary
Short summary
A rope-climbing robot (RCR) can reciprocate on a rope. To address poor load capacity and adaptability, this study designs a dual-rope crawler type RCR for use as a new type of transportation equipment in hilly, mountainous, and plateau areas. The crawler rope-climbing mechanism is a combination of a chain drive and the rope-climbing foot. With overhead rope parabolic theory to kinematically analyze the RCR system, the robot motion trajectory model and tilt angle equation are established.
Mengyuan Chen, Hangrong Guo, Runbang Qian, Guangqiang Gong, and Hao Cheng
Mech. Sci., 15, 1–16, https://doi.org/10.5194/ms-15-1-2024, https://doi.org/10.5194/ms-15-1-2024, 2024
Short summary
Short summary
The proposed VTD-SLAM algorithm has the following advantages. (1) A multiclass feature enhancement and multiclass feature guidance semantic segmentation network (MSNET) is proposed to improve the semantic segmentation ability of dynamic objects. (2) Optimal neighbor pixel matching is used to complete the image of the deleted region. Our method can effectively solve the influence of dynamic objects, so that the SLAM system can operate effectively.
Yu Rong, Xingchao Zhang, Tianci Dou, and Hongbo Wang
Mech. Sci., 14, 567–577, https://doi.org/10.5194/ms-14-567-2023, https://doi.org/10.5194/ms-14-567-2023, 2023
Short summary
Short summary
This paper presents a new method to design a new mechanism with fewer moving joints and greater bearing capacity. These machinery-manufacturing, parts-processing, and other fields have a wide range of application prospects.
Haojun Zhang, Tao Song, and Leigang Zhang
Mech. Sci., 14, 503–518, https://doi.org/10.5194/ms-14-503-2023, https://doi.org/10.5194/ms-14-503-2023, 2023
Short summary
Short summary
To enable the control system to provide minimal assistance and apply different rehabilitation stages according to the subject's performance, this paper proposes a motion-trend-based assistance control strategy. The preliminary experimental results demonstrate that the proposed control strategy works well to quickly adjust the assistance to the subject's motor performance and quickly reduce the assistance when the subject tends to actively participate in the exercise.
Liyong Wang, Li Yang, Le Li, Jianpeng Wu, and Qian Zou
Mech. Sci., 14, 463–477, https://doi.org/10.5194/ms-14-463-2023, https://doi.org/10.5194/ms-14-463-2023, 2023
Short summary
Short summary
The development of bionic skin has always been a challenging scientific research problem. A novel experimental method is proposed for investigating fingertip friction perception characteristics. The results show that the tactile perception accuracy can be improved by changing the surface texture and lubrication conditions. The method can provide peer experience for revealing tactile perception mechanisms and can also provide theoretical guidance for the research of bionic skin.
Xinong En, Yimin Zhang, and Xianzhen Huang
Mech. Sci., 14, 439–450, https://doi.org/10.5194/ms-14-439-2023, https://doi.org/10.5194/ms-14-439-2023, 2023
Short summary
Short summary
A novel method is presented for efficiently analyzing the reliability of engineering components and systems with highly nonlinear complex limit state functions. To demonstrate the effectiveness of the proposed method, four examples involving mathematical functions and mechanical problems are solved. The findings demonstrate that while maintaining high-precision reliability results, the proposed method significantly reduces the number of evaluations of the limit state function.
Junqiang Li, Kuan Yang, and Dong Yang
Mech. Sci., 14, 429–438, https://doi.org/10.5194/ms-14-429-2023, https://doi.org/10.5194/ms-14-429-2023, 2023
Short summary
Short summary
A wearable ankle assisted robot is developed to meet the demand for ankle assistance during human walking. The active energy storage mechanism in the robot can realize the storage and release of energy and realize the application of a low-power motor to provide large assisted force. The experimental results show that the net metabolic cost of the participants is reduced by averages of 5.30 %, 5.67 %, and 4.84 % with 0, 4, and 8 kg loads respectively.
Tao Qin, Qianpeng Wang, Wei Su, Chao Wei, Yanduo Zhang, and Jianwei Zhang
Mech. Sci., 14, 413–427, https://doi.org/10.5194/ms-14-413-2023, https://doi.org/10.5194/ms-14-413-2023, 2023
Short summary
Short summary
A cable-driven body weight support gait training robot (C-BWSGTR) was designed to help provide patients with partial body weight support and a stable walking driving force to assist gait rehabilitation training. Overall configuration, kinematic modeling, and motion planning were carried out, and a position servo composite control strategy was designed. Simulation analysis and the prototype experiment verified that the designed control strategy met the requirements of the system.
Yu Rong, Tianci Dou, and Xingchao Zhang
Mech. Sci., 14, 399–412, https://doi.org/10.5194/ms-14-399-2023, https://doi.org/10.5194/ms-14-399-2023, 2023
Short summary
Short summary
Resource coordination and allocation strategies are proposed to reduce the probability of failure by aiming at the problem that the robot cannot continue to work after joint failure. Taking the planar 4R redundant robot as an example, the algorithm control is compared. Based on reasonable modeling and physical verification, the results show that the method of optimal resource coordination and allocation is effective.
Ruiming Li, Xianhong Zhang, Shuo Zhang, Ran Liu, and Yan-an Yao
Mech. Sci., 14, 387–398, https://doi.org/10.5194/ms-14-387-2023, https://doi.org/10.5194/ms-14-387-2023, 2023
Short summary
Short summary
This paper deals with the construction of a novel family of multimode deployable mechanisms. By connecting many identical threefold-symmetric Bricard-like mechanisms, a multimode deployable arch is proposed for the first time, which can switch between the scissor-like deployable mode and the arch deformable mode through the transition configuration. Then, new multimode center-driven deployable mechanisms can be obtained by connecting three and six multimode deployable arches.
Sen Qian, Xiao Jiang, Yong Liu, Shuaikang Wang, Xiantao Sun, and Huihui Sun
Mech. Sci., 14, 371–386, https://doi.org/10.5194/ms-14-371-2023, https://doi.org/10.5194/ms-14-371-2023, 2023
Short summary
Short summary
A 3-degrees-of-freedom cable-driven hybrid 3D-printing mechanism is developed to overcome the high inertia of rigid printing mechanisms and the difficulties of mechanism analysis, a vector analysis method is proposed, and a prescribed-performance controller is designed to improve the stability and motion accuracy of the end-effector. A physical simulation environment and a prototype of the mechanisms are developed. Finally, the clay-printing experiment results show the mechanism to be feasible.
Chao Yang, Peijiao Li, Yang Wang, Wei Ye, Tianze Sun, Fengli Huang, and Hui Zhang
Mech. Sci., 14, 361–370, https://doi.org/10.5194/ms-14-361-2023, https://doi.org/10.5194/ms-14-361-2023, 2023
Short summary
Short summary
The main contribution of this work is to propose a multi-objective optimization design method in terms of factor analysis, a back-propagation (BP) neural network, principal component analysis (PCA), and a particle swarm optimization (PSO) algorithm to achieve optimal comprehensive performance of a mechanism. The computational cost of the proposed approach was reduced by 96.95 % compared with the PSO algorithm, and the comprehensive performance increased by 118.92 %.
Liming Zhang, Xiaohua Wang, Haoyi Wang, and Pengfei Li
Mech. Sci., 14, 347–359, https://doi.org/10.5194/ms-14-347-2023, https://doi.org/10.5194/ms-14-347-2023, 2023
Short summary
Short summary
This paper proposes a robot following method to follow the sewing action of human upper limbs. The purpose of this paper is to demonstrate that robots can assist workers in the future. Compared with the visual servo method, the accuracy is much improved.
Li Zheng and Tao Song
Mech. Sci., 14, 315–331, https://doi.org/10.5194/ms-14-315-2023, https://doi.org/10.5194/ms-14-315-2023, 2023
Short summary
Short summary
In this paper, a gait analysis algorithm for a lower limb rehabilitation robot is proposed. The algorithm realizes the division of gait temporal information and the design of a gait spatiotemporal parameter algorithm based on lidar. A spatial parameter-splicing algorithm based on a time series is proposed, which effectively reduces the influence of errors on gait parameters. Based on the gait algorithm, aiming at real-time algorithm performance, a dynamic window method is proposed.
Xiaomeng Chu, Yali Liu, and Hong Zeng
Mech. Sci., 14, 305–314, https://doi.org/10.5194/ms-14-305-2023, https://doi.org/10.5194/ms-14-305-2023, 2023
Short summary
Short summary
In the design and processing of face gears, it is not necessary to accurately express the tooth surface with an equation, since it will be difficult to analyze some of the most important and practical features, such as the induced curvature relationship. In this regard, this paper uses the discrete curvature relationship of a spatial gradient curvature ellipsoid to describe the space meshing surface, and it establishes a set of discrete digital conjugate surface meshing principles.
Haijun Xu, Liyang Xu, Yikun Feng, Xiaojun Xu, Yue Jiang, and Xue Gao
Mech. Sci., 14, 277–292, https://doi.org/10.5194/ms-14-277-2023, https://doi.org/10.5194/ms-14-277-2023, 2023
Short summary
Short summary
A high-speed wheeled amphibious vehicle was designed and researched based on computational fluid dynamic (CFD) technology. The results were compared with the corresponding test results for verification. CFD is applied to analyze the influence of the wheel flip angle on the resistance performance, and resistance reduction is explained by the change in wake flow-field of the amphibious vehicle. The wheel well was optimized based on our requirement for the vehicle performance on land and water.
Rui Liu, Yishan Zeng, Min Hu, Huabing Zhu, Changhai Liu, and Lei Wang
Mech. Sci., 14, 259–275, https://doi.org/10.5194/ms-14-259-2023, https://doi.org/10.5194/ms-14-259-2023, 2023
Short summary
Short summary
In order to reduce the energy loss and improve the wear resistance of a piston–cylinder pair in an axial piston motor,an optimized tapered piston bore is designed and applied. A fluid–structure interaction numerical model and a new test rig of the friction force of the piston–cylinder pair are developed. Numerical analysis and experimental results show that the optimized tapered-shape piston bore in an axial piston motor can achieve a significant reduction in leakage flow and friction force.
Yanding Guo, Dong Wei, Tieqiang Gang, Xining Lai, Xiaofeng Yang, Guangming Xiao, and Lijie Chen
Mech. Sci., 14, 223–235, https://doi.org/10.5194/ms-14-223-2023, https://doi.org/10.5194/ms-14-223-2023, 2023
Short summary
Short summary
This research provides a topology optimization method for thermal structures considering design-dependent convection boundaries. The effectiveness of the proposed method is illustrated using cases with reasonable configurations under complex thermal boundary conditions.
Said Ghani Khan
Mech. Sci., 14, 209–222, https://doi.org/10.5194/ms-14-209-2023, https://doi.org/10.5194/ms-14-209-2023, 2023
Short summary
Short summary
Humanoid robots are stepping into the social environment. However, smooth and safe operation is still a challenge. Faults in robotics, whether mechanical or electrical, are still inevitable. In this work, we present a fault-tolerant scheme for a humanoid robotic arm, to minimize the damage if a joint fails during normal operation or during human–robot interaction or cooperation.
Bo Han, Yuxian Yao, Yuanzhi Zhou, Yundou Xu, Jiantao Yao, and Yongsheng Zhao
Mech. Sci., 14, 193–207, https://doi.org/10.5194/ms-14-193-2023, https://doi.org/10.5194/ms-14-193-2023, 2023
Short summary
Short summary
A double-layer ring truss deployable antenna mechanism is proposed, which is connected by a scissor-like structure. The degrees of freedom, six-dimensional velocity, and acceleration are calculated using spiral theory, and the dynamic model is established. Simulation software is used to verify the simulation, and the prototype is made at a reduced scale. Because the satellite antenna is very important, we decided to study the supporting frame.
Jian Qi, Yuan Gao, and Fufu Yang
Mech. Sci., 14, 171–178, https://doi.org/10.5194/ms-14-171-2023, https://doi.org/10.5194/ms-14-171-2023, 2023
Short summary
Short summary
Overconstrained linkages always need fewer links to realize complex motion in a 3D space and are supposed to be great for constructing large deployable structures. However, the strict geometric conditions are hard to use in a complicated 3D environment. In this study, joint clearance is actively introduced to improve the adaptivity of the linkages (with an example given). This work is significant for improving the application of overconstrained linkages in a complicated environment.
Qiaolian Xie, Qiaoling Meng, Wenwei Yu, Rongna Xu, Zhiyu Wu, Xiaoming Wang, and Hongliu Yu
Mech. Sci., 14, 159–170, https://doi.org/10.5194/ms-14-159-2023, https://doi.org/10.5194/ms-14-159-2023, 2023
Short summary
Short summary
This paper presents a novel soft bionic elbow exoskeleton based on shape metal alloy (SMA) actuators (Sobee-SMA). The exoskeleton adopts a bionic design, combining active deformation material SMA and high elastic material rubber band to simulate the contraction and relaxation of the elbow skeletal muscle. According to the static analysis of the human–exoskeleton coupling model and experiments, the exoskeleton provides elbow-assisted motion and ensures the safety of the thermal heating process.
Wei Zhang, Zhen Liu, Wenrui Liu, Jianwei Sun, and He Lu
Mech. Sci., 14, 125–142, https://doi.org/10.5194/ms-14-125-2023, https://doi.org/10.5194/ms-14-125-2023, 2023
Short summary
Short summary
A new method to solve the motion generation problem of a spherical four-bar crank slider rigid-body guidance mechanism is introduced. According to the amplitude and phase of the position output and direction output of the mechanism, the method of establishing the mechanism output characteristic database is given. Then the solution method of size parameters is given. According to the database and solution method, the motion generation is realized.
Yuan Huan, Gongchang Ren, Xiangyu Su, and Weizhi Tian
Mech. Sci., 14, 111–123, https://doi.org/10.5194/ms-14-111-2023, https://doi.org/10.5194/ms-14-111-2023, 2023
Short summary
Short summary
A reconfigurable multi-link mechanism is proposed, and based on the multi-link mechanism and the roller fingertip structure, an end effector is designed to manipulate geometric soft fabrics. The working principle of the reconfigurable multi-link mechanism, the structure and grasping mode of the end effector are introduced in detail, and the kinematics analysis and simulation of the end effector are carried out.
Pan Zhou, Jiantao Yao, Hongyu Zhang, Xuanhao Zhang, Shuaiqi kong, and Kunming Zhu
Mech. Sci., 14, 99–109, https://doi.org/10.5194/ms-14-99-2023, https://doi.org/10.5194/ms-14-99-2023, 2023
Short summary
Short summary
Lightweight and stable continuum robot design is a challenge. We propose a 65 g continuum robot formed using cruciform-arranged elastic sheets. It has low coupling, better bending characteristics in the deformation direction, and a large load capacity in the non-deformation direction, providing a new configuration for lightweight and dexterous continuum robots. Its kinematics model accuracy is experimentally verified. Nucleic acid detection demonstration proves its dexterity and adaptability.
Quansheng Jiang, Kai Cai, and Fengyu Xu
Mech. Sci., 14, 87–97, https://doi.org/10.5194/ms-14-87-2023, https://doi.org/10.5194/ms-14-87-2023, 2023
Short summary
Short summary
Traditional path-planning algorithms for bending robots are often a sequence of multiple line segments and an unsmoothed curve, which causes a discontinuous robot motion. A smooth path can ensure continuous motion. We propose an improved artificial potential field-based path-planning method based on the idea of a rapidly exploring random tree (RRT) algorithm, reducing the length of and smoothing the path, thus solving the path-planning problem of a multi-degrees-of-freedom (DOF) bending robot.
Jiabao Pan, Jin Ye, Hejin Ai, Jiamei Wang, and You Wan
Mech. Sci., 14, 47–60, https://doi.org/10.5194/ms-14-47-2023, https://doi.org/10.5194/ms-14-47-2023, 2023
Short summary
Short summary
Optimizing the structure of the dust extraction port is the key to effectively improving the operational performance of the sweeper. CFD methods are used to analyze the influence of parameters on the sweeping effect in combination with a gas–solid two-phase flow model. The data set is established with the help of orthogonal test methods, and a BP neural network is used to fit the structural parameters and evaluation indexes.
Da Song, Xinlei Xiao, Gang Li, Lixun Zhang, Feng Xue, and Lailu Li
Mech. Sci., 14, 19–32, https://doi.org/10.5194/ms-14-19-2023, https://doi.org/10.5194/ms-14-19-2023, 2023
Short summary
Short summary
The haptic interactive robot based on a cable-driven parallel mechanism studied in this paper is mainly used for interactive training between an astronaut and a virtual environment. This haptic interactive robot can accurately simulate the motion and mechanical characteristics of objects in a microgravity environment and can safely interact with astronauts.
Minghui Zhang and Yiming Su
Mech. Sci., 14, 1–13, https://doi.org/10.5194/ms-14-1-2023, https://doi.org/10.5194/ms-14-1-2023, 2023
Short summary
Short summary
A new type of wheel–leg deformation mechanism, based on an electromagnetic clutch and gear rack transmission mechanism, is designed for moving on complex terrain. The walking model is established to study the kinematics characteristics and obstacle-surmounting performance of the mechanism. The stability cone method is used to evaluate the rollover stability and anti-interference ability in order to ensure the normal operation of the mechanism.
Guoxing Zhang, Jianliang He, Jinwei Guo, and Xinlu Xia
Mech. Sci., 13, 1019–1029, https://doi.org/10.5194/ms-13-1019-2022, https://doi.org/10.5194/ms-13-1019-2022, 2022
Short summary
Short summary
The closed-form dynamics equation of the 1.8 m aperture parallel antenna is established. The relationship between the mechanism's natural frequency, displacement response, and resonance frequency is obtained. Based on the dynamic model, the closed-loop motion control strategy of the parallel antenna mechanism is established. The tracking error of the pitch and azimuth motion of the parallel antenna in the workspace is within ±0.05°.
Enyi He and Shihao Yin
Mech. Sci., 13, 1011–1018, https://doi.org/10.5194/ms-13-1011-2022, https://doi.org/10.5194/ms-13-1011-2022, 2022
Short summary
Short summary
A novel helical gear mechanism with improved geometry is proposed to reduce transmission errors. For the novel spiral gear mechanism with improved geometry, the maximal contact stresses change more smoothly and have a stronger bearing capacity. The results show that, under the same conditions, the gear in this paper improves the transmission accuracy, and the bearing capacity is also stronger.
Jinshuai Xu, Yingpeng Zhuo, Zhaohui Qi, Gang Wang, Tianjiao Zhao, and Tianyu Wang
Mech. Sci., 13, 991–1009, https://doi.org/10.5194/ms-13-991-2022, https://doi.org/10.5194/ms-13-991-2022, 2022
Short summary
Short summary
A super element of the telescopic boom for an all-terrain crane is proposed, and its geometric nonlinear calculation is realized by the co-rotational (CR) formulation. Considering the cable force, the nonlinear equilibrium equations of the system are established, which are transformed into differential equations, and the load displacement curves of the nodes are obtained. Through the slope ratio of the load displacement curve, the judgment criterion of the instability load is established.
Jinnan Lu and Yang Liu
Mech. Sci., 13, 979–990, https://doi.org/10.5194/ms-13-979-2022, https://doi.org/10.5194/ms-13-979-2022, 2022
Short summary
Short summary
Aiming at the potential safety problems caused by the looseness of bucket teeth of the electric shovel, we propose an improved YOLOX algorithm. After introducing the dilated CBAM, the deep separable convolution, and model compression, the mAP is decreased by 0.33 %, the detection speed is increased by 11.9 fps, and the model volume is reduced to 29.46 % of the YOLOX model. It provides a theoretical basis and technical support for the development of intelligent mines and mining intelligence.
Jiasheng Pan, Leigang Zhang, and Qing Sun
Mech. Sci., 13, 949–959, https://doi.org/10.5194/ms-13-949-2022, https://doi.org/10.5194/ms-13-949-2022, 2022
Short summary
Short summary
Robot-assisted rehabilitation has proven to be effective for improving the motor performance of patients with neuromuscular injuries. Therefore, the main purpose of this paper is to present a new patient-cooperative control framework for an end-effector upper-limb rehabilitation robot that provides robot-assisted training for individuals with neuromuscular disorders. The feasibility of the proposed control scheme is validated via training experiments using five healthy subjects.
Qiang Yin, Junpeng Yu, Shaoyun Song, Yonglin Zhang, Gang Zhao, Zhiqiang Hao, and Ao Hu
Mech. Sci., 13, 961–978, https://doi.org/10.5194/ms-13-961-2022, https://doi.org/10.5194/ms-13-961-2022, 2022
Short summary
Short summary
In order to store grain in large warehouses, a process is required that will prevent the effects of mildew and heat. Real-time monitoring of the grain status is needed. Using the information obtained from the monitoring system, corresponding measures were taken for the heating and mildew points in the grain pile. We proposed a drill which is a granary grain condition detector. It can be equipped with temperature, CO2, and humidity sensors and gather information by entering the grain pile.
Tsung-Yi Lin and Wen-Feng Lin
Mech. Sci., 13, 933–948, https://doi.org/10.5194/ms-13-933-2022, https://doi.org/10.5194/ms-13-933-2022, 2022
Short summary
Short summary
This study mainly analyzed the mechanism and technology of nine existing vertically arranged mechanical turret clocks manufactured in Europe from the 15th to the 17th century, in order to determine the design rules based on mechanical evolution and variation. This study provided new historical materials that could be applied in the research of science and technology history, as well as in innovative and science education.
Yongping Liu and Dengqiu Ma
Mech. Sci., 13, 909–920, https://doi.org/10.5194/ms-13-909-2022, https://doi.org/10.5194/ms-13-909-2022, 2022
Short summary
Short summary
Firstly, the tooth surface modification method based on the parabolic forming blade and cutter inclination was proposed. Next, the modified tooth surface equation was deduced and the 3D reconstruction of the modified tooth surface is realized. Then, the influence of modification parameters on tooth surface curvature characteristics was analysed. Finally, the tooth contact analysis model was established to discuss the influence of modification parameters on the elliptical contact area.
Tsung-Yi Lin and Wen-Feng Lin
Mech. Sci., 13, 877–897, https://doi.org/10.5194/ms-13-877-2022, https://doi.org/10.5194/ms-13-877-2022, 2022
Short summary
Short summary
Chamber clocks are weight-driven wall clocks and the first type of domestic clocks to be widely used in the home. In this study, we used the method of mechanical evolution and variation, analyzed and compared clock movements based on historical data and existing clocks, and synthesized all possible movement configurations of early-day chamber clocks.
Yongming Liu, Lei Fu, Zhuanzhe Zhao, Qiang Ma, Yujian Rui, and Zhen Zhang
Mech. Sci., 13, 855–866, https://doi.org/10.5194/ms-13-855-2022, https://doi.org/10.5194/ms-13-855-2022, 2022
Short summary
Short summary
The coaxiality–geometric hysteresis model of the RV reducer transmission system is established, and the model is simulated and analyzed with Adams software. The results show that coaxiality is one of the main error factors affecting hysteresis. This research can provide a theoretical basis and reference materials for the measurement and design of RV reducer hysteresis, as well as the design of the RV reducer performance high-precision detection device and its adjustment mechanism.
Gang Chen, Zhenyu Wang, Jiajun Tu, and Donghai Wang
Mech. Sci., 13, 831–842, https://doi.org/10.5194/ms-13-831-2022, https://doi.org/10.5194/ms-13-831-2022, 2022
Short summary
Short summary
In the research and development process of underwater motion control of the beaver-like robot, the hind leg and tail are the main actuators. In order to estimate the driving force of the robot autonomously during underwater movement, we propose this model, which can quickly and easily infer the force of the hind leg on the body. The correctness of this model is verified by experiments and simulations.
Chia-Wei Juang, Chi-Shiun Jhuang, and Dar-Zen Chen
Mech. Sci., 13, 817–830, https://doi.org/10.5194/ms-13-817-2022, https://doi.org/10.5194/ms-13-817-2022, 2022
Short summary
Short summary
This paper proposes a spring efficiency assessment and the efficient use of springs methods for a static spring-balanced manipulator. Gravity is balanced by springs; however, it also contains counter-effects between springs. Conceptually, with fewer counter-effects between springs, there is less burden on the spring system, which means that the springs are used more efficiently. Through adjustment of the springs' attachment and parameters, a method to use springs efficiently is developed.
Yang Zhang, Hsin-Te Wang, Jian-Liang Lin, Chin-Fei Huang, and Kuo-Hung Hsiao
Mech. Sci., 13, 791–802, https://doi.org/10.5194/ms-13-791-2022, https://doi.org/10.5194/ms-13-791-2022, 2022
Short summary
Short summary
Barbed-spring padlocks are the typical locks used in ancient China, and can be divided into three main types, namely open-keyhole, hidden-keyhole, and blocked-keyhole padlocks. With the combinations and changes of springs, keys, and keyholes, the padlocks have a variety of different unlocking methods which provide higher security. Six examples are provided to demonstrate the opening processes of blocked-keyhole padlocks.
Yehui Zhao, Lijun Xue, Guangming Wang, Fanglei Zou, Yue Song, and Hongjian Zhang
Mech. Sci., 13, 771–790, https://doi.org/10.5194/ms-13-771-2022, https://doi.org/10.5194/ms-13-771-2022, 2022
Short summary
Short summary
In this study, we want to design a 4R linkage so that a point on its coupler can pass through the four specified positions. However, for most synthesis problems, the number of feasible solutions in the solution domain is seriously insufficient. Therefore, a solutions map method was proposed to realize the visualization of the solution domain and a telomere genetic algorithm (TGA) was proposed to optimize solutions map, so as to improve the number and proportion of feasible solutions.
Yi Zheng, Minghua Liu, Baoshun Li, Guoqing Ma, and Maohua Xiao
Mech. Sci., 13, 725–733, https://doi.org/10.5194/ms-13-725-2022, https://doi.org/10.5194/ms-13-725-2022, 2022
Short summary
Short summary
In order to improve the structural performance of the out-of-pipe pipe-climbing robot, the out-of-pipe pipe-climbing robot is optimized. The structure and size of the robot was optimized. Static and modal analyses were then performed on key robot components and ANSYS was used for topology optimization. It was found the weight of the optimized frame and clamping arm were respectively reduced by 24 % and 20 %, and the maximum stress was respectively reduced by 46 % and 20 %.
Hao-Tien Ku and Yu-Hsun Chen
Mech. Sci., 13, 701–712, https://doi.org/10.5194/ms-13-701-2022, https://doi.org/10.5194/ms-13-701-2022, 2022
Short summary
Short summary
To lower the frequency of suspending and calibrating a robot manipulator, an innovative device for enlarging the allowed position error is proposed in this study. It is a purely mechanical device without any electrical sensors. A trigger mechanism with a spring is used to replace a touch sensor and an actuator, and a six-bar linkage delivers the bolt to the hole that the trigger mechanism detected for it to be screwed in. The functions of the new device are verified through prototype testing.
Ruoyu Tan, Jieji Zheng, Bin Yu, Baoyu Li, Dapeng Fan, and Xin Xie
Mech. Sci., 13, 687–699, https://doi.org/10.5194/ms-13-687-2022, https://doi.org/10.5194/ms-13-687-2022, 2022
Short summary
Short summary
A novel hollow-ring permanent magnet brake integrated in robot joints is proposed, which allows the brake to require much less axial space and provides more than 1.5 times braking torque for the same volume as the conventional electromagnetic-spring friction brake. A coupled dynamics model of the proposed brake is developed from machine-electric-magnetic aspects. The 3D model of the brake is simulated through finite-element software. The theoretical models are verified through experiments.
Long Huang, Peng Zeng, Lairong Yin, and Juan Huang
Mech. Sci., 13, 659–673, https://doi.org/10.5194/ms-13-659-2022, https://doi.org/10.5194/ms-13-659-2022, 2022
Short summary
Short summary
This paper proposes a novel origami-based deployable mechanism, which can be deployed from the cuboid folded configuration to the cylindrical configuration. In comparison with the reported deployable mechanism composed of links, the hinge arrangement of the proposed mechanism makes it easier to achieve a higher stiffness. It is applied to the design of a parabolic cylindrical deployable antenna, and a scaled prototype of the antenna is constructed to verify the feasibility of the design.
Qiaoling Meng, Yiming Yue, Sujiao Li, and Hongliu Yu
Mech. Sci., 13, 675–685, https://doi.org/10.5194/ms-13-675-2022, https://doi.org/10.5194/ms-13-675-2022, 2022
Short summary
Short summary
This paper proposes a novel EMG-based motion compensation controller in active training control to improve patients’ active participation. After proposing an upper limb rehabilitation robot and doing the path plan, the EMG compensation experiments and the active training control experiment are done to prove that the method can control the robot in providing auxiliary force according to patients’ motion intents. The robot can guide the patients in implementing reference tasks in active training.
Cited articles
Eden, E. M.: Application of spring strips to instrument design, Notes of Applied Science No. 15, 1956.
Henein, S.: Conception des guidages flexibles, Presses Polytechniques et Universitaires Romandes, ISBN 2-88074-481-4, 2001.
Henein, S.: Device for converting a first motion into a second motion responsive to said first motion under a demagnification scale, Patent EP06021785, Holder: Paul Scherrer Institut, 2006.
Henein, S., Spanoudakis, P., Droz, S., Myklebust, L., and Onillon, E.: Flexure pivot for aerospace mechanisms, Proc. 10th European Space Mechanisms and Tribology Symposium, San Sebastian, Spain, 24–26 September 2003, ESA SP-524, 285–288, 2003.
Howell, L.: Compliant mechanisms, John Wiley & Sons Inc, 2001.
Koster, M. P.: Constructieprincipes voor het nauwkeurig bewegen en positioneren, 5th edn., HBuitgevers, Baarn, NL, 1996.
Pei, X. and Yu, J.: ADLIF: a new large-displacement beam-based flexure joint, Mech. Sci., 2, 183–188, https://doi.org/10.5194/ms-2-183-2011, 2011.
Schellenkens, P., Rosielle, N., Vermeulen, M., Wetzels, S., and Pril, W.: Design for precision: current status and trends, Annals of the CIRP, Vol. 47/2/1998, 1998.
Smith, S. T.: Flexures, Gordon and Breach Science Publishers, ISBN 90-5699-261-9, 2000.
Special issue