Journal cover Journal topic
Mechanical Sciences An open-access journal for theoretical and applied mechanics
Journal topic

Journal metrics

Journal metrics

  • IF value: 1.052 IF 1.052
  • IF 5-year value: 1.567 IF 5-year
    1.567
  • CiteScore value: 1.92 CiteScore
    1.92
  • SNIP value: 1.214 SNIP 1.214
  • IPP value: 1.47 IPP 1.47
  • SJR value: 0.367 SJR 0.367
  • Scimago H <br class='hide-on-tablet hide-on-mobile'>index value: 18 Scimago H
    index 18
  • h5-index value: 16 h5-index 16
Supported by
Logo Library of Delft University of Technology Logo NWO
Affiliated to
Logo iftomm

Volume 10, issue 1

Volume 10, issue 1

07 Jan 2019
Design and hardware selection for a bicycle simulator
Georgios Dialynas, Riender Happee, and Arend L. Schwab
Mech. Sci., 10, 1–10, https://doi.org/10.5194/ms-10-1-2019,https://doi.org/10.5194/ms-10-1-2019, 2019
Short summary
07 Jan 2019
Mechanism design and analysis of a proposed wheelchair-exoskeleton hybrid robot for assisting human movement
Zhibin Song, Chuanyin Tian, and Jian S. Dai
Mech. Sci., 10, 11–24, https://doi.org/10.5194/ms-10-11-2019,https://doi.org/10.5194/ms-10-11-2019, 2019
10 Jan 2019
Solution-region-based synthesis approach for selecting optimal four-bar linkages with the Ball–Burmester point
Lairong Yin, Long Huang, Juan Huang, Lei Tian, and Fangyi Li
Mech. Sci., 10, 25–33, https://doi.org/10.5194/ms-10-25-2019,https://doi.org/10.5194/ms-10-25-2019, 2019
Short summary
10 Jan 2019
Use of mixed coordinates in modeling wind turbines including tubular tower
Ayman Nada and Ali Al-Shahrani
Mech. Sci., 10, 35–46, https://doi.org/10.5194/ms-10-35-2019,https://doi.org/10.5194/ms-10-35-2019, 2019
Short summary
11 Jan 2019
Compact design of a novel precise cable drive mechanism with high precision and large torque-to-weight ratio
Xin Xie, Xianliang Jiang, Shixun Fan, and Dapeng Fan
Mech. Sci., 10, 47–56, https://doi.org/10.5194/ms-10-47-2019,https://doi.org/10.5194/ms-10-47-2019, 2019
Short summary
18 Jan 2019
Energy saving optimal design and control of electromagnetic brake on passenger car
Donghai Hu, Yanzhi Yan, and Xiaoming Xu
Mech. Sci., 10, 57–70, https://doi.org/10.5194/ms-10-57-2019,https://doi.org/10.5194/ms-10-57-2019, 2019
Short summary
15 Feb 2019
Design and dynamic analysis of metal rubber isolators between satellite and carrier rocket system
Xibin Cao, Cheng Wei, Jiqiu Liang, and Lixu Wang
Mech. Sci., 10, 71–78, https://doi.org/10.5194/ms-10-71-2019,https://doi.org/10.5194/ms-10-71-2019, 2019
Short summary
19 Feb 2019
Dynamic Reliability Analysis of Rotary Steering Drilling System
Leilei Huang, Qilong Xue, Baolin Liu, Chunxu Yang, Ruihe Wang, and Laiju Han
Mech. Sci., 10, 79–90, https://doi.org/10.5194/ms-10-79-2019,https://doi.org/10.5194/ms-10-79-2019, 2019
Short summary
04 Mar 2019
Origami fold states: concept and design tool
Alex Avila, Spencer P. Magleby, Robert J. Lang, and Larry L. Howell
Mech. Sci., 10, 91–105, https://doi.org/10.5194/ms-10-91-2019,https://doi.org/10.5194/ms-10-91-2019, 2019
Short summary
13 Mar 2019
Design of a robot-assisted exoskeleton for passive wrist and forearm rehabilitation
Mehmet Erkan Kütük, Lale Canan Dülger, and Memik Taylan Daş
Mech. Sci., 10, 107–118, https://doi.org/10.5194/ms-10-107-2019,https://doi.org/10.5194/ms-10-107-2019, 2019
Short summary
03 Apr 2019
Laparoscope arm automatic positioning for robot-assisted surgery based on reinforcement learning
Lingtao Yu, Xiaoyan Yu, Xiao Chen, and Fengfeng Zhang
Mech. Sci., 10, 119–131, https://doi.org/10.5194/ms-10-119-2019,https://doi.org/10.5194/ms-10-119-2019, 2019
Short summary
04 Apr 2019
Quasi-static axial crushing of hexagonal origami crash boxes as energy absorption devices
Jiayao Ma, Huaping Dai, Mengyan Shi, Lin Yuan, Yan Chen, and Zhong You
Mech. Sci., 10, 133–143, https://doi.org/10.5194/ms-10-133-2019,https://doi.org/10.5194/ms-10-133-2019, 2019
26 Apr 2019
Buckling of elastically restrained nonlocal carbon nanotubes under concentrated and uniformly distributed axial loads
Mouafo Teifouet Armand Robinson and Sarp Adali
Mech. Sci., 10, 145–152, https://doi.org/10.5194/ms-10-145-2019,https://doi.org/10.5194/ms-10-145-2019, 2019
Short summary
03 Jun 2019
Experimental study of immersion ratio and shaft inclination angle in the performance of a surface-piercing propeller
Seyyed Mostafa Seyyedi, Rouzbeh Shafaghat, and Mohioddin Siavoshian
Mech. Sci., 10, 153–167, https://doi.org/10.5194/ms-10-153-2019,https://doi.org/10.5194/ms-10-153-2019, 2019
Short summary
07 Jun 2019
Numerical analysis of the influence of the damping rings' thickness on interrupted dynamic tension results using SiC-reinforced ZC71 magnesium alloy specimens
Roberto-Alonso González-Lezcano and José-Manuel del Río Campos
Mech. Sci., 10, 169–186, https://doi.org/10.5194/ms-10-169-2019,https://doi.org/10.5194/ms-10-169-2019, 2019
07 Jun 2019
Nonlinear Dynamic Analysis of high speed multiple units Gear Transmission System with Wear Fault
Jianwei Yang, Ran Sun, Dechen Yao, Jinhai Wang, and Chuan Liu
Mech. Sci., 10, 187–197, https://doi.org/10.5194/ms-10-187-2019,https://doi.org/10.5194/ms-10-187-2019, 2019
Short summary
11 Jun 2019
Influence of grinding wheel parameters on the meshing performance of toroidal surface enveloping conical worm drive
Chongfei Huai and Yaping Zhao
Mech. Sci., 10, 199–211, https://doi.org/10.5194/ms-10-199-2019,https://doi.org/10.5194/ms-10-199-2019, 2019
11 Jun 2019
Analytical Study of Babbitt/steel Composite Structural Bars in Oblique Contact-impact with a Solid Flat Surface
Yao Wang and Zhuang Fu
Mech. Sci., 10, 213–228, https://doi.org/10.5194/ms-10-213-2019,https://doi.org/10.5194/ms-10-213-2019, 2019
Short summary
12 Jun 2019
Stability analysis of bicycles by means of analytical models with increasing complexity
Alberto Doria, Sergio Roa, and Luis Muñoz
Mech. Sci., 10, 229–241, https://doi.org/10.5194/ms-10-229-2019,https://doi.org/10.5194/ms-10-229-2019, 2019
Short summary
14 Jun 2019
Estimation of tool life and cutting burr in high speed milling of the compacted graphite iron by DE based adaptive neuro-fuzzy inference system
Longhua Xu, Chuanzhen Huang, Rui Su, Hongtao Zhu, Hanlian Liu, Yue Liu, Chengwu Li, and Jun Wang
Mech. Sci., 10, 243–254, https://doi.org/10.5194/ms-10-243-2019,https://doi.org/10.5194/ms-10-243-2019, 2019
Short summary
18 Jun 2019
Mechanism design and parameter optimization of a new asymmetric translational parallel manipulator
Yi Yang, Yaqi Tang, Haijun Chen, Yan Peng, and Huayan Pu
Mech. Sci., 10, 255–272, https://doi.org/10.5194/ms-10-255-2019,https://doi.org/10.5194/ms-10-255-2019, 2019
Short summary
19 Jun 2019
Effect of Quenching Media and Tempering Temperature on Fatigue Property and Fatigue Life Estimation Based on RBF Neural Network of 0.44 % Carbon Steel
Song Guo, Changyou Li, Jingang Shi, Fangjun Luan, and Xiaoyu Song
Mech. Sci., 10, 273–286, https://doi.org/10.5194/ms-10-273-2019,https://doi.org/10.5194/ms-10-273-2019, 2019
21 Jun 2019
Research on Influence of Joint Clearance on Precision of 3-TPT Parallel Robot
Chunxia Zhu and Zhiyu Zhao
Mech. Sci., 10, 287–298, https://doi.org/10.5194/ms-10-287-2019,https://doi.org/10.5194/ms-10-287-2019, 2019
Short summary
25 Jun 2019
Displacement amplification ratio modeling of bridge-type nano-positioners with input displacement loss
Jinyin Li, Peng Yan, and Jianming Li
Mech. Sci., 10, 299–307, https://doi.org/10.5194/ms-10-299-2019,https://doi.org/10.5194/ms-10-299-2019, 2019
Short summary
25 Jun 2019
Computer-aided synthesis of spherical and planar 4R linkages for four specified orientations
Guangming Wang, Hao Zhang, Xiaoyu Li, Jiabo Wang, Xiaohui Zhang, and Guoqiang Fan
Mech. Sci., 10, 309–320, https://doi.org/10.5194/ms-10-309-2019,https://doi.org/10.5194/ms-10-309-2019, 2019
Short summary
27 Jun 2019
Influence of eccentricity of double eccentricity sleeves on the movements of swing head in rotary forging press
Xin Liu, Chun Dong Zhu, Xi Jiang, and Yi Zhang
Mech. Sci., 10, 321–330, https://doi.org/10.5194/ms-10-321-2019,https://doi.org/10.5194/ms-10-321-2019, 2019
Short summary
01 Jul 2019
Designing optimal automatic cycles of round grinding based on the synthesis of digital twin technologies and dynamic programming method
Pavel P. Pereverzev, Aleksandra V. Akintseva, Masar K. Alsigar, and Dmitrii V. Ardashev
Mech. Sci., 10, 331–341, https://doi.org/10.5194/ms-10-331-2019,https://doi.org/10.5194/ms-10-331-2019, 2019
CC BY 4.0
Publications Copernicus