24 citations as recorded by crossref.

1. Towards sustainability assessment, energy consumption, and carbon emissions in cryogenic drilling of Alloy 20: a new approach towards sustainable future and challenges V. Sivalingam et al. 10.1007/s00170-024-13144-3
2. Development and analysis of tool wear and energy consumption maps for turning of titanium alloy (Ti6Al4V) M. Younas et al. 10.1016/j.jmapro.2020.12.060
3. Development of a cyclic liquid nitrogen injection system and its application to minimum quantity lubrication milling of the Ti-6Al-4V alloy N. Paschoalinoto et al. 10.1007/s00170-021-07994-4
4. Multi-Objective Optimization of Micro-Milling Titanium Alloy Ti-3Al-2.5V (Grade 9) Using Taguchi-Grey Relation Integrated Approach M. Khan et al. 10.3390/met13081373
5. Experimental Evaluation of Surface Roughness, Burr Formation, and Tool Wear during Micro-Milling of Titanium Grade 9 (Ti-3Al-2.5V) Using Statistical Evaluation Methods M. Khan et al. 10.3390/app132312875
6. A review on performance evaluation of liquid nitrogen as coolant in turning Ti-6Al-4V alloy M. Dhananchezian 10.1080/10910344.2023.2180749
7. Evaluation of tribological interactions and machinability of Ti6Al4V alloy during finish turning under different cooling conditions K. Leksycki et al. 10.1016/j.triboint.2023.109002
8. Multi-objective optimization of turning titanium-based alloy Ti-6Al-4V under dry, wet, and cryogenic conditions using gray relational analysis (GRA) M. Khan et al. 10.1007/s00170-019-04913-6
9. Experimental study of tool wear and its effects on cutting process of ultrasonic-assisted milling of Ti6Al4V Q. Liu et al. 10.1007/s00170-020-05593-3
10. Optimization of compressed air assisted-turning-burnishing process for improving machining quality, energy reduction and cost-effectiveness T. Nguyen & C. Le 10.1177/0954405420976661
11. A decision support tool for intelligent manufacturing systems via an elevator kinematic optimisation based method P. Luangpaiboon et al. 10.1016/j.eswa.2022.117576
12. Investigation of tool wear and energy consumption in machining Ti6Al4V alloy with uncoated tools M. Younas et al. 10.1007/s00170-024-13548-1
13. MACHINABILITY STUDIES OF WROUGHT TITANIUM ALLOY Ti-6Al-4V BASED ON ORTHOGONAL ARRAY DESIGN K. RAJAN et al. 10.1142/S0218625X23500142
14. Turning of Inconel 718 using liquid nitrogen: multi-objective optimization of cutting parameters using RSM B. Eskandari et al. 10.1007/s00170-022-08906-w
15. Statistical Analysis of Machining Parameters on Burr Formation, Surface Roughness and Energy Consumption during Milling of Aluminium Alloy Al 6061-T6 S. Zaidi et al. 10.3390/ma15228065
16. Assessment of sustainability of machining Ti-6Al-4V under cryogenic condition using energy map approach M. Khan et al. 10.1016/j.jestch.2023.101357
17. Comparative analysis of tool wear progression of dry and cryogenic turning of titanium alloy Ti-6Al-4V under low, moderate and high tool wear conditions M. Khan et al. 10.1007/s00170-022-09196-y
18. Evaluation of specific cutting energy, tool wear, and surface roughness in dry turning of titanium grade 3 alloy A. Ahmad et al. 10.1007/s00170-023-11580-1
19. Nanobiolubricant grinding: a comprehensive review Y. Song et al. 10.1007/s40436-023-00477-7
20. Machinability analysis of Ti-6Al-4V under cryogenic condition   M. Khan et al. 10.1016/j.jmrt.2023.06.022
21. Parametric Analysis of Tool Wear, Surface Roughness and Energy Consumption during Turning of Inconel 718 under Dry, Wet and MQL Conditions M. Siddique et al. 10.3390/machines11111008
22. Experimental measurement of the cutting forces and wear of the drill in processing X17CrNi16-2 martensitic stainless steel A. Rosca et al. 10.5194/ms-12-269-2021
23. Multi-Objective Optimization of Process Parameters during Micro-Milling of Nickel-Based Alloy Inconel 718 Using Taguchi-Grey Relation Integrated Approach M. Sheheryar et al. 10.3390/ma15238296
24. Cryogenic minimum quantity lubrication machining: from mechanism to application M. Liu et al. 10.1007/s11465-021-0654-2